DeDuster® Product Line
The standard DeDuster® systems have discharge capacities ranging from a few lbs/h (kg/h) up to 200,000 lbs/h (100 tons/h). For applications that require higher capacities, Pelletron has built custom models capable of processing several hundred tons per hour. For installations with inclined silo outlet pipes, the OS-DeDuster® (OffSet) was developed. For narrow packaging lines, the DO-DeDuster® (single inlet and Dual Outlet) was designed. Pelletron also provides wash down DeDuster® systems designed for cleaning with water between product changes. Pelletron continues to respond to customer requests for unique applications.
P-Series DeDuster® Original low height design
XP-Series DeDuster® X-tra low height & energy consumption
NOTE: Selection of the DeDuster® model depends on the bulk density of the product being cleaned, the shape of the pellets and the type and quantity of the fines.
Wash Down DeDuster®
Wash down confi gurations are available for most DeDuster® types. The design allows the cleaning with water and easy access to all areas of the DeDuster®.
Wide Body Design
For some retrofit applications, the available height is not sufficient for the installation of a standard DeDuster®. Pelletron offers a wide body version of its P- and XP- Series in order to reduce the construction height.
The RC-Series offers low height DeDuster® options designed for a wide range of products with capacities up to 100,000 lbs/h (90.000 kg/h). The round design allows for a reduction in height and lower energy consumption. The larger sizes are available upon request.
The lightweight C20 DeDuster® weighs 20 lbs (9 kg) and requires only 9.5 in (240 mm) for installation between the hopper loader and inlet hopper of an injection molding machine. The high cleaning effi ciency offers exceptional results. It features stainless steel construction, 110 or 220 V operation and only consumes 2-3 CFM (3.4-5 m3/h) compressed air at 20-30 psi (1.5 – 2 bar) pressure.
This DeDuster® has an offset inlet outlet design. It can be used for applications with inclined piping or other configurations that require an offset design. Various sizes are available. Others can be designed based on unique customer requirements.
This DeDuster® has a single inlet and a dual outlet. It can be used for special applications where narrow or shallow packaging machines are installed or other configurations that require a dual design. Various sizes are available and others can be designed based on unique customer requirements.
For special high grade resins, mirror polishing of the DeDuster® is required (buffing 400). All DeDuster® types can be supplied in polished versions.
Mobile DeDuster® Systems
Any DeDuster® system can be supplied as mobile unit. Mobile units can be installed on rails, on a mobile stand or installed on a bagging machine.
For high abrasive bulk materials, a wear resistant DeDuster® is necessary. All DeDuster® types can be supplied in wear resistant versions.