NOTICIAS Y PRENSA

Newsletter FineAlyzer® ASTM Standard

Pelletron introduces the FineAlyzer® for the measurement of Fines and Dust Particles on Plastic Pellets by Wet Test Analysis in accordance with the new ASTM Standard D-7486-08

WHY A NEW WET TEST STANDARD?

Plastics Manufacturers need a reliable wet test method to determine the fines and dust content in plastic pellets. Plastics Processors’ increasing quality demands for resins with low fine content forced the plastic manufacturers to improve the quality of their resins. Installation of DeDusters® under the silos before bag packaging or filling stations for rail cars and trucks is considered state-of-the-art technology today. In order to prove the remaining dust content after DeDusting a test method became necessary.

The European Federation established a wet test method to determine the content of fines in the year 1999, the FEM 2482. This method defines dust content in three classes: Type A from 63μm to 500μm, Type B from 45μm to 500μm, and Type C from 20μm to 500μm.

The FEM standard doesn’t determine a fines analysis below 20μm. In addition, the fines analysis apparatus described in the FEM standard faces one major issue; it uses a closed loop automated water washing system for one hour for separation of the fines from the pellets. The tumbling effect, along with the friction of the pellets against the sieve and walls of the apparatus, can potentially create additional fines during the separation process. This method may lead to tampered results, depending on the pellets characteristics. Particularly, the very fine dust particles are the cause of quality problems during processing.  For many years, Pelletron has used a fines analysis to measure the dust between 1.6μm to 500μm. Pelletron has worked with ASTM to establish the new standard using the Pelletron fines analysis procedures, the FineAlyzer®. The Pelletron method in accordance with the ASTM procedure avoids any vigorous movement or friction of pellets during the fines separation process and delivers the most accurate, non-tampered measuring results.

HOW THE FineAlyzer® WORKS

The fundamental principal used by the FineAlyzer® is based on the condition that the unwanted dust and fines will normally adhere to the larger pellets and will be removed by rinsing the test sample with a liquid (preferably demineralized water). This causes the fines and dust in the sample to wash away to the beaker below. These particles are then poured into the filter collection unit, separating the fines from the water. The weight of the filter paper is very accurately measured before and after the collection process, and this weight is used to calculate the PPM of the sample. The wet analysis quantifies the amounts of dust with particle sizes from 1.6 to 500 microns.

The FineAlyzer® is available from Pelletron as a complete unit, in accordance with CE regulations.  Please contact us for more information or to ask for a proposal. Pelletron also provides free-of-charge DeDusting tests, including a dry and wet test analysis, presented in an electronic report format.  

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 

A.    Mobile Cart
B.    Water Tank, Integral Drain and Pump
C.    Filter Collection Unit
D.    1500 ml Beaker
E.    500 Micron Sieve and Funnel
F.     Ground Fault Circuit Indicator
G.    Spray Nozzle/Rinse Tube
H.    Water Flow Control Valve
I.      Laboratory Oven
J.     Laboratory Analytical Balance
K.    Pump Switch

ILLUSTRATED VARIOUS TESTING STEPS

Samples of resins are taken before DeDusting and after DeDusting.
For both samples, a dry and wet test analysis will be provided.

ABOUT PELLETRON CORPORATION
Founded in 1986, Pelletron Corporation provides dedusting solutions to processors and manufacturers in an array of applications including plastics, recycling, automotive, medical equipment, mining, and food. 

For more information, please contact MoMaTech GmbH e-mail r.graf@momatech.de, or Pelletron Corporation info@pelletroncorp.com or visit our web page www.pelletroncorp.com.

Download newsletter 01|2009

Nosotros: